Description
The Epson L1800 printhead-based DTF printers that this generic capping unit set, which includes two capping units, is compatible with are numerous. The capping inlets fit ink tubes of an inner diameter of 2mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. We recommend changing the capping units when replacing the printhead. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
UJF-3042 Cap Assy – M012112
$100.87Mimaki UJF-3042 printers can use this generic Cap Assy.
SKU: PCAMI14085O
Manufacturer part number: M012112
Manufacturers: DIGIPRINT , Mimaki
GS Series Fitting Luer Male .170 Barb (100 pcs) – P4812-A
$632.40VUTEk QS- and GS-Series printers are compatible with this set of 100 Fitting Luer Male.170.
SKU: MTLL445/1
Manufacturer part number: P4812-A
Manufacturer: EFI
JV3-160SP Bearing – F607ZZ
$26.34Mimaki printers can use this Bearing.
SKU: F607ZZ
Manufacturer part number: F607ZZ
Manufacturer: Mimaki
BN-20 Carton, Box – 1000008695
$249.33This box and carton are compatible with Roland BN-20 printers. This is the original Roland part (number 1000008695).
SKU: 1000008695
Manufacturer part number: 1000008695
Manufacturer: Roland
UJF-605C Suck Nozzle 2,5 – M601390
$68.77This suck nozzle is suitable for Mimaki UJF-605C / UJV-110 / UJV-160 / UJF-605SRII printers. This is the original Mimaki component (M601390/M602452).
SKU: M601390
Manufacturer part number: M601390
Manufacturer: Mimaki
VS-300i L-Bearing, Ssr15Xw1Gge/W2Ge+1440L(B) – 1000010669
$2,801.68For Roland VS-300i printers, this L-Bearing, Ssr15Xw1Gge/W2Ge+1440L(B) is suitable. This is the original Roland part (number 1000010669).
SKU: 1000010669
Manufacturer part number: 1000010669
Manufacturer: Roland
Related Products
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
JV33 Y Drive Belt – M800982
$254.72This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: M800982
Manufacturer part number: M800982
Manufacturer: Mimaki
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
XJ-640 Belt,150S2M2754LW-C – 1000003688
$644.02Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
Reviews
There are no reviews yet.