Description
This suck nozzle is suitable for Mimaki UJF-605C / UJV-110 / UJV-160 / UJF-605SRII printers. This is the original Mimaki component (M601390/M602452).
Marabu Clearshield® Classic Lite – 5L – Semi-Gloss
$306.08Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360298812
Manufacturer part number: 360298812
Manufacturer: Marabu
Rho Fitting ABSML-6-07 Yellow – 1342800
$5.62This Male Luer with Rotating Lock Ring in yellow natural polypropylene is suitable for the Durst Rho printers.
SKU: ABSML-6005-07
Manufacturer part number: 1342800
Manufacturer: Durst
SummaSign BEARING BLOCK – 421-198
$52.15This BEARING BLOCK is suitable for Summa SummaSign cutters. This is the original Summa part (number 421-198).
SKU: 421-198
Manufacturer part number: 421-198
Manufacturer: Summa
Y Tube Fitting ID Tubing 6.4MM Nylon Black (10 pcs)
$30.87This black nylon Y tube fitting is compatible with all wide format inkjet printers and resists solvents. 6.4mm (1/4 inch) ID tubing can be accommodated by this fitting. This fitting has a barbed tubing connection with no parting lines on the barb to ensure a leak-free tubing union. This fitting is made of Nylon which is solvent resistant and is black to fit UV applications. Best performance is provided by this high-quality fitting, which is produced in the United States. Ten fittings come in a package.
SKU: PCNDI19187
Manufacturer: DIGIPRINT
XC-540 Carton, Stand L/R – 1000001635
$104.45This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000001635
Manufacturer part number: 1000001635
Manufacturer: Roland
JV33 Bulk Ink System MBIS3 – OPT-J0364
$5,025.46This JV33 Bulk Ink System MBIS3 – OPT-J0364 is suitable for Mimaki printers.
SKU: OPT-J0364
Manufacturer part number: OPT-J0364
Manufacturer: Mimaki
Related Products
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Reviews
There are no reviews yet.