Description
This linear bearing rail is suitable for Roland XJ-640 printers. This rail is required to use new LWES15Q (PMERO18951) linear bearing blocks when your printer is equipped with the older, discontinued LWES15QQ linear bearing blocks. This rail is 2560mm long.
Additional information
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
X-Rite Z-axis Spacer for i1iO
$1,523.30
AJ-1000 L-Bearing, SSR15XW2GE+3620LY – 1000000553
$5,155.63This L-Bearing, SSR15XW2GE+3620LY is suitable for Roland AJ-1000 printers. The original Roland part in this case is number 1000000553. 362 cm in length is this L-Bearing.
SKU: 1000000553
Manufacturer part number: 1000000553
Manufacturer: Roland
LC BIS Cartridge Bungs 3mm (16 pcs) – KY-08970
$59.76This set of 16 cartridge bungs 3mm is suitable for Mutoh printers with bulk ink system. The original Mutoh component (number KY-08970) is here. The cartridges ME-089019, ME-089017, and ME-089016 are compatible with these bungs.
SKU: KY-08970
Manufacturer part number: KY-08970
Manufacturer: Mutoh
Marabu Clearshield® Classic Lite – 5L – Semi-Gloss
$306.08Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360298812
Manufacturer part number: 360298812
Manufacturer: Marabu
Rockhopper 3 Steel Belt 64 – DF-42874
$218.67This generic steel belt of 64 inches is suitable for Mutoh Rockhopper 3 65 and Spitfire 65 printers. This is a high quality generic belt that corresponds to Mutoh part number DF-42874). This belt is 4750mm long and 25mm wide.
SKU: PBEMURH001O
Manufacturer part number: DF-42874
Manufacturers: DIGIPRINT , Mutoh
SJ-1000 Belt,150S2M3653LW-C – 21925148
$974.40Roland SJ-1000 printers are compatible with this Belt,150S2M3653LW-C.
SKU: PBEROSJ6021
Manufacturer part number: 21925148
Manufacturer: Roland
Related Products
AJ-1000 Assy, Pinch Org Board – W700105720
$69.44This Assy, Pinch Org Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number W700105720).
Printer compatibility
Roland AJ-1000
Roland AJ-1000i
Roland AJ-740
Roland AJ-740i
Product specifications
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
JV5 Bearing – F699ZZ
$4.93Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
S Class 75 KIT FLATCABLES S75T – 395-403
$240.67This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
Reviews
There are no reviews yet.