Description
This belt is suitable for Roland VS-640i printers. This is the original Roland part (number 1000010581). This belt is 4850mm long and 15mm wide.
Epson XP600 / TX800 capping unit
$42.02A wide range of Epson XP600/TX800 printhead-based DTF printers can use this generic capping unit.
SKU: PCAEPXP607
Manufacturers: Epson , DIGIPRINT
R-BEARING D8S4(B3) – 11889102
$47.78The Roland GX-24 cutting plotters can use this R-Bearing D8S4(B3).
SKU: 11889102
Manufacturer part number: 11889102
Manufacturer: Roland
CJV30 CP Joint – M602095
$92.29Mimaki printers of the CJV30 and JV33 series are compatible with this CP Joint. This is the original part for the Mimaki (number M602095).
SKU: M602095
Manufacturer part number: M602095
Manufacturer: Mimaki
JV3 ID Point Of Contact PCB CN032 – E105363
$29.88This ID Point Of Contact PCB CN032 is suitable for Mimaki JV3 / JV33 / JV5 and CJV30 series printers.
VS-540i Carton, Sleeve – 1000011040
$293.17This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000011040
Manufacturer part number: 1000011040
Manufacturer: Roland
TF Belt (S2M) with Pulley Assy – DH-40486
$411.78This TF Belt (S2M) with Pulley Assy is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DH-40486
Manufacturer part number: DH-40486
Manufacturer: Mutoh
Related Products
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
Reviews
There are no reviews yet.