Description
Roland VS-420 printers can use this generic belt. The Roland part number 1000007235 is matched by this generic component. This belt is 15 mm wide and 3078 mm long.
JV3 ID Point Of Contact PCB CN032 – E105363
$29.88This ID Point Of Contact PCB CN032 is suitable for Mimaki JV3 / JV33 / JV5 and CJV30 series printers.
Male Luer Integral Lock Ring to 500 Series Barb, 1/16″ (1.6 mm) ID Tubing (100 pc)
$271.02All wide format inkjet printers can use this set of 100 solvent-resistant black nylon Male Luer Integral Lock Ring to 500 Series Barb.
SKU: MTLL004/2
Manufacturer: DIGIPRINT
FJ-600 L-Bearing SSR15XW2U+2260LYF – 11899136AS
$5,447.43The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 11899136AS
Manufacturer part number: 11899136AS
Manufacturer: Roland
JV3 Cap Top – M004908
$45.23The capping station of Mimaki JV3 printers is compatible with this generic cap top that resists solvents and has an iron and a transparent tube.
SKU: PCAROSB001
Manufacturers: DIGIPRINT , Roland
Fitting for G638W 2X6 (3pcs)
$105.30This set of 3 fittings is suitable for EFI Vutek H2000.
SKU: PADVUG68W
Manufacturer: DIGIPRINT
Anapurna M Coupling SR19 – D2+7350101-0001
$126.58The AGFA:Anapurna M printers can use this SR19 coupling. It is used in the print head lifting mechanism. This is the original Agfa component (number D2+7350101-0001 has been substituted for D2+2102083). This SR19 coupling has an inner diameter of 5.98mm and an outer diameter of 19.11mm.
SKU: SRB-19-6-5
Manufacturer part number: D2+7350101-0001
Manufacturer: Agfa
Related Products
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
SJ-740 L-Bearing SSR15XW1UUE – 21895153 (Block only)
$306.56For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Reviews
There are no reviews yet.