Description
Roland VG-640 printers are compatible with this GASKET,STGH 10-10 L=300MM.
This is the original Roland part (number 1000015159).
The supply of this component has ceased. It has been discontinued by the manufacturer.
SJ-500 L-Bearing SSR15XW1 (Block Only)
$653.45Roland SJ-500 printers are compatible with this block, SSR15XW1.
SKU: 414SSR15WSSC1
Manufacturer part number: 21895151
Manufacturer: Roland
JV400-LX Cap Assy – M016105
$530.79This Cap Assy is suitable for Mimaki JV400 series printers.
SKU: M016105
Manufacturer part number: M016105
Manufacturer: Mimaki
RJ-8000 X Speed Reduction Belt – DF-42846
$37.49Mutoh RJ-8000 (Falcon II) printers are compatible with this X Speed Reduction Belt. The original Mutoh component (DF-42846) can be found here.
SKU: 19163
Manufacturer part number: DF-42846
Manufacturer: Mutoh
CONNECTOR,SUPPLAY SECTION HY431 – 1000021806
$35.19This CONNECTOR,SUPPLAY SECTION HY431 is an original Roland part, suitable for a specific range of Roland printers.
SKU: 1000021806
Manufacturer part number: 1000021806
Manufacturer: Roland
ASSY,CAP TOP SV – 6000005885
$382.48This original Roland part, the ASSY,CAP TOP SV, is compatible with a specific range of Roland printers.
SKU: 6000005885
Manufacturer part number: 6000005885
Manufacturer: Roland
JV5-320S X Joint Shaft – M205458
$569.92This X Joint Shaft is suitable for Mimaki JV5-320S & JV5-260S printers.
SKU: M205458
Manufacturer part number: M205458
Manufacturer: Mimaki
Related Products
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
VJ-1604 Steel Belt – DF-43937
$206.65Mutoh Valuejet 1604 printers are compatible with this steel belt.
SKU: DF-43937
Manufacturer part number: DF-43937
Manufacturer: Mutoh
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
SJ-740 L-Bearing SSR15XW1UUE – 21895153 (Block only)
$306.56For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Reviews
There are no reviews yet.