Description
This L-Bearing is suitable for Roland SP-300I / VP-300 / VP-300I / VP-540 / VS-300 printers. The original Roland part (number 1000002196) can be found here. This L-Bearing is 1440 mm long.
LEJ-640 Belt, 244P2M4-530 – 1000007153
$42.63This generic belt is suitable for Roland LEJ-640 printers.
SKU: 010990
Manufacturer part number: 1000007153
Manufacturers: Roland , DIGIPRINT
Mimaki / Roland / Mutoh Solvent Resistant Y Connector (ID: 3mm, OD: 4mm)
$15.08Three tubes with an ID of 3 mm and an OD of 4 mm can be connected with this solvent-resistant Y connector.
SKU: PCNDI8749
Manufacturers: DIGIPRINT , Mutoh , Roland , Mimaki
VS-540i Carton, Spacer – 1000011042
$71.75This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000011042
Manufacturer part number: 1000011042
Manufacturer: Roland
Epson XP600 / TX800 capping unit
$42.02A wide range of Epson XP600/TX800 printhead-based DTF printers can use this generic capping unit.
SKU: PCAEPXP607
Manufacturers: Epson , DIGIPRINT
CX-24 Belt, 1526P2M6 – 11929116
$78.18Picture of CX-24 Belt, 1526P2M6 – 11929116Picture of CX-24 Belt, 1526P2M6 – 11929116Picture of CX-24 Belt, 1526P2M6 – 11929116
The Roland CX-24 and GX-24 cutting plotters are compatible with this belt. This is the original Roland part (number 11929116). This belt has a circumference of 151.8cm and is 0.6cm wide.
SKU: 11929116
Manufacturer part number: 11929116
Manufacturer: Roland
Sub Tank Heater – DG-48941
$137.04This Sub Tank Heater is a genuine Mutoh component that works with specific Mutoh printer models.
SKU: DG-48941
Manufacturer part number: DG-48941
Manufacturer: Mutoh
Related Products
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
AJ-1000 Assy, Pinch Org Board – W700105720
$69.44This Assy, Pinch Org Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number W700105720).
Printer compatibility
Roland AJ-1000
Roland AJ-1000i
Roland AJ-740
Roland AJ-740i
Product specifications
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
Reviews
There are no reviews yet.