Description
This LM guide is suitable for Roland SJ-740 printers. This part includes the rail only (without the blocks) that corresponds to part number 21895154. This LM Guide is 2740mm long.
Additional information
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
ValueCut Y-Axis Belt – ML-10024
$184.15This Y-Axis Belt is suitable for Mutoh ValueCut series cutting plotters. This is the original Mutoh part (number ML-10024). This Y-Axis Belt has a circumference length of 172mm and is 10mm wide.
SKU: ML-10024
Manufacturer part number: ML-10024
Manufacturer: Mutoh
UltraVu II 3360 Belt Timing HTD5 34.0FT – P5183-34.0
$1,622.25EFI VUTEk UltraVu II 3360 and QS series printers are compatible with this 34-foot-long timing belt.
SKU: P5183-34.0
Manufacturer part number: P5183-34.0
Manufacturer: EFI
DuraChrome Belt CF – 444739-01VH
$155.64Summa DuraChrome printers are compatible with this Belt CF. This is the original Summa part (number 444739-01VH).
SKU: 444739-01VH
Manufacturer part number: 444739-01VH
Manufacturer: Summa
QS Series Fitting Luer 1/8 Male (10 pcs) – P1922-A
$77.35The VUTEk UltraVU 150, PressVU 200/600, and QS-series printers can all use this set of 10 Fitting Luer 1/8 Males. On one side, these connectors have a 1/8-inch tube hose barb and a male ISO Luer lock on the other. P1922-A is the original VUTEk component.
SKU: PCNVU12611
Manufacturer part number: P1922-A
Manufacturer: EFI
VS-540i Carton, Spacer – 1000011042
$71.75This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000011042
Manufacturer part number: 1000011042
Manufacturer: Roland
Toucan Steel Belt, 87 Assy – DF-44132
$232.18This generic Steel Belt, 87″ Assy is suitable for Mutoh Toucan 87 printers. The Mutoh part number DF-44132, which was discontinued and is no longer available as an original part, is matched by this high-quality generic steel belt. This Steel Belt, 87″ Assy is 482.5cm long and 2.5cm wide.
SKU: PBEMUTO6002O
Manufacturer part number: DF-44132
Manufacturers: DIGIPRINT , Mutoh
Related Products
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
VJ-1604 Bearing – KY-14620
$4.57Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
JV5 Bearing – F699ZZ
$4.93Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
Reviews
There are no reviews yet.