Description
This LM guide is suitable for Roland SJ-740 printers. This part includes the rail only (without the blocks) that corresponds to part number 21895154. This LM Guide is 2740mm long.
Additional information
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
JF Series Cap Base – M400287
$79.25This JF Series Cap Base – M400287 is suitable for Mimaki printers.
SKU: M400287
Manufacturer part number: M400287
Manufacturer: Mimaki
Ink Waste Tank 3L
$111.87This ink waste tank is compatible with most of printers.
SKU: PTADTF6531
Manufacturer: DIGIPRINT
Jeti Female Luer to Hose Barb Connector 3mm ID Tubing (20 pcs)
$84.18The Jeti ink tank uses this set of 20 Female Luer to Hose Barb connectors, which are compatible with 3mm ID tubing.
SKU: FTLL230-6005/20
Manufacturers: Agfa , DIGIPRINT
Arizona 6100 FTG Push 1/4 OD 5/32 ID TEE – 3W3010105241
$19.73Océ Arizona 6100 and Fujifilm Acuity F series printers work with this Fitting Push Tee. The original Océ component (number 3010105241) is here. The inner diameter of this fitting is 4mm (5/35″), while the outer diameter is 6.4mm (1/4″).
SKU: 3W3010105241
Manufacturer part number: 3010105241
Manufacturer: Canon Océ
VJ-2628TD Steel Belt – DG-40324
$324.80Mutoh Valuejet 2628TD printers are compatible with this steel belt. This is the original Mutoh part (number DG-40324). This Steel Belt is 693.5cm long and 2.5cm wide.
SKU: DG-40324
Manufacturer part number: DG-40324
Manufacturer: Mutoh
Roland R-BEARING JIS 685ZZ(B4) – 22225801
$16.84The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 22225801
Manufacturer part number: 22225801
Manufacturer: Roland
Related Products
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
XJ-640 Belt,150S2M2754LW-C – 1000003688
$644.02Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
JV33 Y Drive Belt – M800982
$254.72This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: M800982
Manufacturer part number: M800982
Manufacturer: Mimaki
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
Reviews
There are no reviews yet.