Description
This LM guide is suitable for Roland SJ-740 printers. This part includes the rail only (without the blocks) that corresponds to part number 21895154. This LM Guide is 2740mm long.
Additional information
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
VJ-426UF I/C Holder Assy 1 (Fitting) – DG-45274
$775.08This I/C Holder Assy 1 (Fitting) is suitable for Mutoh Valuejet 426UF printers. This is the original Mutoh part (number DG-45274).
SKU: DG-45274
Manufacturer part number: DG-45274
Manufacturer: Mutoh
SP-300i L-Bearing, SSR15XW1GGE/W2GE+1440L – 1000002196
$3,120.88This L-Bearing is suitable for Roland SP-300I / VP-300 / VP-300I / VP-540 / VS-300 printers. The original Roland part (number 1000002196) can be found here. This L-Bearing is 1440 mm long.
SKU: 1000002196
Manufacturer part number: 1000002196
Manufacturer: Roland
FJ-540 Case Cap Top – 21365121
$12.59Roland printers are suitable for this cap-top case.
SKU: 21365121
Manufacturer part number: 21365121
Manufacturer: Roland
SummaSign / SummaCut Motor – KIT-1042
$1,725.47This kit is suitable for SummaSign and SummaCut Series.
SKU: KIT-1042
Manufacturer part number: KIT-1042
Manufacturer: Summa
DIGIMEDIA Polymeric Gloss Overlaminate – 1372 mm x 50 m (54″ x 164′)
$343.97
Mimaki CJV Y Drive Belt – M801104 / M801103 / M801102 / M801109
$95.49This drive belt is suitable for all Mimaki CJV 60-100-130-160 printers.
SKU: PBEMI16955
Manufacturer: Mimaki
Related Products
AJ-1000 Assy, Main Board – 1000000559
$3,431.37This Assy, Main Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 1000000559). Printer compatibility Roland AJ-1000 Roland AJ-1000i Roland AJ-740 Roland AJ-740i Product specifications Type Main Boards
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
JV5 Bearing – F699ZZ
$4.93Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
Reviews
There are no reviews yet.