Description
This LM guide is suitable for Roland SJ-740 printers. This part includes the rail only (without the blocks) that corresponds to part number 21895154. This LM Guide is 2740mm long.
Additional information
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
Anapurna Mv Solution Bar – D2+7130209-0009
$5,211.65Agfa: Anapurna Mv and Dilli NEO Titan UVT-1606W printers can use this solution bar. This is the original Agfa oart (number D2+7130209-0009).
SKU: D2+7130209-0009
Manufacturer part number: D2+7130209-0009
Manufacturer: Agfa
Colorpainter 64S Steel Belt – U00101625600
$306.14This generic steel belt (64) is suitable for Seiko Colorpainter 64S and HP Designjet 9000 printers. This generic part, which is the same as Seiko part number U00101625600, is of excellent quality. This belt is 468.5cm long and 2.5cm wide.
SKU: PBESECP0040
Manufacturer part number: U00101625600
Manufacturers: DIGIPRINT , Oki
Polyurethane S5M 25mm (20m roll)
$345.32The polyurethane belt has a length of 25 meters and is compatible with numerous printers.
SKU: PUS5M25-20m
Manufacturer: DIGIPRINT
XF-640 Carton, Stand – 1000010326
$82.32This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000010326
Manufacturer part number: 1000010326
Manufacturer: Roland
Toucan Steel Belt, 87 Assy – DF-44132
$232.18This generic Steel Belt, 87″ Assy is suitable for Mutoh Toucan 87 printers. The Mutoh part number DF-44132, which was discontinued and is no longer available as an original part, is matched by this high-quality generic steel belt. This Steel Belt, 87″ Assy is 482.5cm long and 2.5cm wide.
SKU: PBEMUTO6002O
Manufacturer part number: DF-44132
Manufacturers: DIGIPRINT , Mutoh
JV5 Y joint 1-2D – M601888
$5.17This Mimaki Y joint 1-2D is suitable for JV5 printers.
SKU: M601888
Manufacturer part number: M601888
Manufacturer: Mimaki
Related Products
JV5 Bearing – F699ZZ
$4.93Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
VJ-1604 Bearing – KY-14620
$4.57Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
Reviews
There are no reviews yet.