Description
This L-BEARING,RSR9NMUUC1+360LM is suitable for Roland printers. This is the original Roland part (number 21895108). This part is no longer available. The manufacturer has discontinued it.
Additional information
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
JV5-260S Bear – 06-64-038-0-128-060.64.12
$1,336.65The Mimaki JV5-260S, JV5-320S, and JV5-320DS printers are compatible with this bear. This is the original component for the Mimaki (number 06-64-038-0-128-060.64.12).
Manufacturer part number:Â 06-64-038-0-128-060.64.12
Manufacturer:Â Mimaki
JV5 Joint Valve Assy – M006954
$25.67Mimaki printers in the JV5, JV33, and CJV30 series can use this joint Valve Assy.
SKU: M006954
Manufacturer part number: M006954
Manufacturer: Mimaki
JF-1610 Linear Way – MES20C2R1480
$1,509.65This linear way is suitable for Mimaki JF-1610 printers. This is the original Mimaki part (number MES20C2R1480). Two blocks make up this 1480mm-long linear path.
SKU: MES20C2R1480
Manufacturer part number: MES20C2R1480
Manufacturer: Mimaki
LC BIS Cartridge Bungs 4mm (8 pcs) – KY-408970
$59.76This set of 8 cartidge bungs 4mm is suitable for Mutoh printers with bulk ink system.
SKU: KY-408970
Manufacturer part number: KY-408970
Manufacturer: Mutoh
Marabu ClearShield Classic Lite – 5L, Gloss
$287.41Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360298811
Manufacturer part number: 360298811
GS Series Fitting Luer 3/32 Male (100 pcs) – P2121-A
$291.80This set of 100 Fitting Luer -> 3/32 Male is suitable for VUTEk GS-Series printers.
SKU: MTLL007-6005
Manufacturer part number: P2121-A
Manufacturer: EFI
Related Products
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
JV5 Bearing – F699ZZ
$4.93Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
VJ-1604 Steel Belt – DF-43937
$206.65Mutoh Valuejet 1604 printers are compatible with this steel belt.
SKU: DF-43937
Manufacturer part number: DF-43937
Manufacturer: Mutoh
Reviews
There are no reviews yet.