Description
This PURGE WIPER, SUCTION BLOCK is compatible with printers of the VUTEk QS series. This is the original 45066759 VUTEk component. The Flex Head Seal (number A62138-A) is included.
BELT,150S2M2999LW-C – 1000000395
$1,671.56This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000000395
Manufacturer part number: 1000000395
Manufacturer: Roland
Ink Waste Tank 3L
$111.87This ink waste tank is compatible with most of printers.
SKU: PTADTF6531
Manufacturer: DIGIPRINT
BELT,100S2M2413LW-C – 1000004778
$844.97This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000004778
Manufacturer part number: 1000004778
Manufacturer: Roland
CG-160FX Toothed Belt 160 – M800709
$534.55This Toothed Belt 160 is suitable for Mimaki CG-160FX cutting plotters.
SKU: PBEMI11471
Manufacturer part number: M800709
Manufacturer: Mimaki
Head Cap Assy – DH-40705
$560.40This Head Cap Assy is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DH-40705
Manufacturer part number: DH-40705
Manufacturer: Mutoh
JV5 Y joint 1-2D – M601888
$5.17This Mimaki Y joint 1-2D is suitable for JV5 printers.
SKU: M601888
Manufacturer part number: M601888
Manufacturer: Mimaki
Related Products
SJ-740 L-Bearing SSR15XW1UUE – 21895153 (Block only)
$306.56For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
JV33 Y Drive Belt – M800982
$254.72This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: M800982
Manufacturer part number: M800982
Manufacturer: Mimaki
Summa S Class Kit S(2) 120 Flat Cable – KIT-2030
$416.04This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
Reviews
There are no reviews yet.