Description
This solvent-resistant Y connector can connect three tubes with an ID of 3 mm and an OD of 4 mm.
S3M Rubber open ended belt (70m)
$1,219.50Open-ended S3M rubber belt
SKU: S3M
Manufacturer part number: OPENRUBS3M15mm
Manufacturer: DIGIPRINT
Roland BELT,900P2M6-530 – 11929130
$87.88This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 11929130
Manufacturer part number: 11929130
Manufacturer: Roland
Fitting f2 – M603013
$2.40Mimaki JV150 and JV300 printers can use this Fitting Assy.
SKU: M603013
Manufacturer part number: M603013
Manufacturer: Mimaki
Y Tube Fitting ID Tubing 6.4MM Nylon Black (20 pcs)
$76.45This set of 20 solvent resistant black nylon Y tube fittings is suitable for all wide format inkjet printers printers.
SKU: Y260-2/20
Manufacturer: DIGIPRINT
Colorpainter 100S Steel Belt – U00097291100
$1,507.18This Steel Belt (100) Assy is suitable for Seiko Colorpainter 100S printers.
SKU: U00097291100
Manufacturer part number: U00097291100
Manufacturer: Oki
UJF-7151 Plus Cap Rubber – M700970
$30.13Mimaki printers are compatible with this UJF-7151 Plus Cap Rubber – M700970.
SKU: M700970
Manufacturer part number: M700970
Manufacturer: Mimaki
Related Products
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
JV5 Bearing – F699ZZ
$4.93Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Reviews
There are no reviews yet.