Description
Marabu ClearShield Select is made with the most recent developments in water-based coating technology and offers superior resistance to abrasion, chemicals, and UV rays. ClearShield Select improves image quality while providing superior protection for digital prints. The new coatings work on a variety of digital substrates and offer enhanced outdoor protection as well as enhanced chemical and mar resistance. For both manual and automated applications, the ClearShield Select coatings are available in gloss, semi-gloss, and matte finishes. It is intended to be applied with a roller or spray equipment on a wide range of digitally printed products including pressure sensitive vinyl, banners and rigid substrates.
Benefits:
ClearShield® liquid coatings offer the same protection as film laminates while saving as much as 60% in production costs. Liquid coating is easy to use and does not require expensive equipments. In contrast to lamination films, there is no risk of bubbling or misalignment with liquid coating.
Specifications:
Product type : Water based liquid coating
Viscosity : Shell Cup #3 30-35 sec
VOC : 48g/L
PH : 8.5 -9.0
Application : Short-Nap roller or High Density Foam Roller
Ink compatibility : Solvent and UV inks.
Media compatibilty : adhesive vinyl, banners, rigid substrates
Coverage of 1L : around 14-15m2 with Roller
Applications:
Banners
Billboards
Exterior Signage
Vinyl
Rigid Substrates
Application Method:
Manual application : Roll the clearshield coating onto the prints using a short-nap roller or a white high-density foam roller. Apply two layers, waiting approximately an hour in-between to complete drying.
Products Finishes available:
Gloss
Semi-Gloss
Matte
ColorPainter M-64s Capping Unit,MW – U00130623600
$9,779.10Oki printers are compatible with this ColorPainter M-64s Capping Unit,MW – U00130623600.
SKU: U00130623600
Manufacturer part number: U00130623600
Manufacturer: Oki
TX400-1800D Joint Valve (L) Assy – M009844
$55.60This TX400-1800D Joint Valve (L) Assy – M009844 is suitable for Mimaki printers.
SKU: M009844
Manufacturer part number: M009844
Manufacturer: Mimaki
CONNECTOR,SAFETY SWITCH – 1000021905
$380.11This CONNECTOR,SAFETY SWITCH is an original Roland part, suitable for a specific range of Roland printers.
SKU: 1000021905
Manufacturer part number: 1000021905
Manufacturer: Roland
VJ-1304 Steel Bear Assy – DG-41142
$199.92Mutoh Valuejet 1304 printers are compatible with this Steel Bear Assembly. This is the original Mutoh part (number DG-41142). The length and width of this Steel Bear Assy are 3.1 centimeters.
SKU: DG-41142
Manufacturer part number: DG-41142
Manufacturer: Mutoh
SWJ Clean Timling Belt – 150 S2M 380G
$26.34The Mimaki SWJ printers are compatible with this Clean Timing Belt.
SKU: 150 S2M 380G
Manufacturer part number: 150 S2M 380G
Manufacturer: Mimaki
SP-540v L-Bearing, LWES15C3R2160QE – 21895169
$3,365.24Roland SP-540v printers can use this L-Bearing.
SKU: LWES15C3R2160QE
Manufacturer part number: 21895169
Manufacturer: Roland
Related Products
Marabu Clearshield® Wall Armor – 20L, Satin
$1,116.30Marabu Clearshield® Wall Armor is a water-based liquid coating that offers stain, scratch and abrasion resistance as well as fire retardancy to your digital wall covering prints. Eco-solvent, UV-curable, and latex inks are all compatible with Clearshield® Wall Armor.
SKU: 360299853
Manufacturer part number:Â 360299853
Manufacturer: Marabu
DIGIMEDIA Monomeric Matte Overlaminate – 1524 mm x 50 m (60″ x 164′)
$251.42
DIGIMEDIA Monomeric Gloss Overlaminate – 1600 mm x 50 m (63″ x 164′)
$277.82High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. As low as €1.05 per square meter
SKU: DLMG63
Manufacturer part number: DLMG63
Distributor: DIGIPRINT
Marabu ClearShield® Anti-Graffiti Part B, Gloss – 16 oz
$109.47Marabu Clearshield® Anti-Graffiti is a two-part water-based liquid clear-coat that offers UV-protection, chemical resistance, abrasion resistance and unmatched anti-graffiti properties to any print. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360256591
Manufacturer part number: 360256591
Manufacturer: Marabu
DIGIMEDIA Monomeric Matte Overlaminate – 1372 mm x 50 m (54″ x 164′)
$227.50
Reviews
There are no reviews yet.