Description
Marabu Clearshield® Classic Lite is a low-viscosity water-based liquid coating for enhanced UV-protection, chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
Benefits:
Lower in viscosity than ClearShield Classic Lite while offering the same great protection and media compatibility. ClearShield Classic Lite can be applied by roller or automated spray equipment.
Specifications:
Product type : Water based liquid coating
Durability: 5 years outdoor with UV Curable inks
Finish : Gloss, Semi-Gloss or Matt
Viscosity : Shell Cup #2 20 – 26 sec.
VOC : 48g/L
PH : 8.5 -9.0
Application : Short-Nap roller or High Density Foam Roller
Ink compatibility : all solvent, eco-solvent, latex and UV inks
Media compatibilty : adhesive vinyl, banners
Coverage of 1L : around 14-15m2 with Roller
Applications :
Banners
Billboards
Canvas Prints
Signage
Wall covering
Vehicle Graphics
Application Method :
Manual application : Roll the clearshield coating onto the prints using a short-nap roller or a white high-density foam roller. Apply two layers, waiting approximately an hour in-between to complete drying.
Products available :
Marabu Clearshield® Classic Lite – 5L, Semi-Gloss – 360298812
Marabu Clearshield® Classic Lite – 1L, Gloss – 360297811
LPX-600 L-Bearing, SSR15XW1GGE+520LY – 1000000064
$1,899.68The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000000064
Manufacturer part number: 1000000064
Manufacturer: Roland
Jeti 3312 UNF Thread to Hose Barb connector 3mm ID Tubing (10 pcs)
$51.21This set of ten UNF Thread to Hose Barb connectors is used on the Jeti 3312 ink tank and is compatible with 3mm ID tubing. The original Agfa part is here. The inner diameter of this UNF Thread to Hose Barb connector is 2.41 millimeters, while the outer diameter is 3.30 millimeters.
SKU: PCNAG13439
Manufacturer: Agfa
TX400-1800D Joint Valve (L) Assy – M009844
$55.60This TX400-1800D Joint Valve (L) Assy – M009844 is suitable for Mimaki printers.
SKU: M009844
Manufacturer part number: M009844
Manufacturer: Mimaki
Roland ADAPTER,DUCT CUFFS 32 – 11909102
$32.12The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 11909102
Manufacturer part number: 11909102
Manufacturer: Roland
CG-130FX Toothed Belt 130 – M800663
$66.95Mimaki CG-130 FX printers can use this generic toothed belt.
SKU: PBEMI_7577O
Manufacturer part number: M800663
Manufacturers: DIGIPRINT , Mimaki
CONNECTOR,RXZE2M114 – 1000021929
$368.57This CONNECTOR,RXZE2M114 is an original Roland part, suitable for a specific range of Roland printers.
SKU: 1000021929
Manufacturer part number: 1000021929
Manufacturer: Roland
Related Products
DIGIMEDIA Polymeric Gloss Overlaminate – 1372 mm x 50 m (54″ x 164′)
$343.97
DIGIMEDIA Polymeric Matte Overlaminate – 1524 mm x 50 m (60″ x 164′)
$380.11
Marabu ClearShield® Anti-Graffiti Part A, Gloss – 1 Gallon
$307.57Marabu Clearshield® Anti-Graffiti is a two-part, water-based liquid clear coat that protects any print from UV rays, resists chemicals and abrasion, and has unparalleled anti-graffiti properties. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360259581
Manufacturer part number: 360259581
Manufacturer: Marabu
DIGIMEDIA Monomeric Gloss Overlaminate – 1050 mm x 50 m (42″ x 164′)
$164.50High-quality, self-adhesive monomeric 70μ clear vinyl, with UV protection and a permanent, high tack acrylic-based, adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. Price per sqm: as low as €1.30 / sqm
SKU: DLMG42
Manufacturer part number: DLMG42
Manufacturer: DIGIPRINT
Marabu ClearShield® Anti-Graffiti Part A, Gloss – 1 Quart
$142.91Marabu Clearshield® Anti-Graffiti is a two-part, water-based liquid clear coat that protects any print from UV rays, resists chemicals and abrasion, and has unparalleled anti-graffiti properties. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360264581
Manufacturer part number: 360264581
Manufacturer: Marabu
Marabu ClearShield® Anti-Graffiti Part B, Gloss – 16 oz
$109.47Marabu Clearshield® Anti-Graffiti is a two-part water-based liquid clear-coat that offers UV-protection, chemical resistance, abrasion resistance and unmatched anti-graffiti properties to any print. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360256591
Manufacturer part number: 360256591
Manufacturer: Marabu
Reviews
There are no reviews yet.