Description
Marabu Clearshield® Classic Lite is a low-viscosity water-based liquid coating for enhanced UV-protection, chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
Benefits:
Lower in viscosity than ClearShield Classic Lite while offering the same great protection and media compatibility. ClearShield Classic Lite can be applied by roller or automated spray equipment.
Specifications:
Product type : Water based liquid coating
Durability: 5 years outdoor with UV Curable inks
Finish : Gloss, Semi-Gloss or Matt
Viscosity : Shell Cup #2 20 – 26 sec.
VOC : 48g/L
PH : 8.5 -9.0
Application : Short-Nap roller or High Density Foam Roller
Ink compatibility : all solvent, eco-solvent, latex and UV inks
Media compatibilty : adhesive vinyl, banners
Coverage of 1L : around 14-15m2 with Roller
Applications :
Banners
Billboards
Canvas Prints
Signage
Wall covering
Vehicle Graphics
Application Method :
Manual application : Roll the clearshield coating onto the prints using a short-nap roller or a white high-density foam roller. Apply two layers, waiting approximately an hour in-between to complete drying.
Products available :
Marabu Clearshield® Classic Lite – 5L, Semi-Gloss – 360298812
Marabu Clearshield® Classic Lite – 1L, Gloss – 360297811
JV5-320S X Joint Shaft – M205458
$569.92This X Joint Shaft is suitable for Mimaki JV5-320S & JV5-260S printers.
SKU: M205458
Manufacturer part number: M205458
Manufacturer: Mimaki
VS-640 ADAPTER,SHAFT TUC-2 – 1000009860
$157.54The Roland VS-300, VS-420, VS-540, VS-640, VG-540, VG-640, VS-300i, VS-540i, VS-640i, VP-300, VP-540, VP-300i, VP-540i, SP-300v, SP-300i, SP-540i, RS-540, RS-640, RA-640, and RE-640 printers are compatible with this adapt This is the original Roland part (number 1000009860).
SKU: 1000009860
Manufacturer part number: 1000009860
Manufacturer: Roland
Male Luer Integral Lock Ring 2.25mm ID Tubing (100 pc)
$159.85This set of 100 solvent resistant red nylon luer male fittings is suitable for all wide format inkjet printers printers.
SKU: MTLL220/3
Manufacturer: DIGIPRINT
Colorpainter 64S Synchronous Belt – U00103427800
$112.69This synchronous belt (64) is suitable for Seiko Colorpainter 64S and 100S printers.
SKU: U00103427800
Manufacturer part number: U00103427800
Manufacturer: Oki
QS2000 Belt Timing HTD5 30FT – P5183-30.0
$556.75This generic 9,14m (30 feet ) long timing belt is suitable for EFI VUTEk QS2000 Series printers.
SKU: PBEVU82716O
Manufacturer part number: P5183-30.0
Manufacturers: DIGIPRINT , EFI
QS Series FS Kit, Purge Wiper, Suction Block – 45066759
$273.19This PURGE WIPER, SUCTION BLOCK is suitable for VUTEk QS series printers.
SKU: 45066759
Manufacturer part number: 45066759
Manufacturer: EFI
Related Products
DIGIMEDIA Monomeric Gloss Overlaminate – 1600 mm x 50 m (63″ x 164′)
$277.82High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. As low as €1.05 per square meter
SKU: DLMG63
Manufacturer part number: DLMG63
Distributor: DIGIPRINT
Marabu Clearshield® Wall Armor – 20L, Satin
$1,116.30Marabu Clearshield® Wall Armor is a water-based liquid coating that offers stain, scratch and abrasion resistance as well as fire retardancy to your digital wall covering prints. Eco-solvent, UV-curable, and latex inks are all compatible with Clearshield® Wall Armor.
SKU: 360299853
Manufacturer part number:Â 360299853
Manufacturer: Marabu
DIGIMEDIA Polymeric Gloss Overlaminate – 1372 mm x 50 m (54″ x 164′)
$343.97
Marabu ClearShield Classic – 5L, Semi-Gloss
$306.08Marabu Clearshield® Classic is a water-based liquid clear-coat that offers UV-protection, chemical resistance, abrasion resistance and flexibility to any print. All solvent, eco-solvent, latex, and UV inks can be used with ClearShield® Classic, which is designed to be used with a wide variety of non-water-sensitive media like banners and self-adhesive vinyl.
SKU: 360298912
Manufacturer part number: 360298912
Manufacturer: Marabu
DIGIMEDIA Monomeric Gloss Overlaminate – 1372 mm x 50 m (54″ x 164′)
$228.14
Marabu ClearJet Original Type A2000, Gloss – 12 oz Spray Can
$45.15Protecting your prints, fine art, signs, banners, photographic output, awnings, and other products from UV rays, abrasion, and marring is simple and affordable with Marabu ClearJet®.
SKU: 360363001
Manufacturer part number: 360363001
Manufacturer: Marabu
Reviews
There are no reviews yet.