Description
This Mimaki JV5 series printer-compatible MBIS2 Bulk Ink System 2Lts (C8) is suitable. Please note this system is with 2 liters bag and 8 colours. Opt-J0306 is the original Mimaki part.
Additional information
| Ink Type | Aqueous, Direct to Garment, DTF |
|---|---|
| Printer Brand | Agfa, Brother, Canon |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
FP-740 Adapter, Tube Joint I/S – 1000002765
$28.83The Roland FP-740 printers can use this Tube Joint I/S Adapter. The original Roland part in this case is number 1000002765.
SKU: 1000002765
Manufacturer part number: 1000002765
Manufacturer: Roland
CG-60st Y Belt 60 – M800920
$42.16The cutting plotters Mimaki CG-60st and CG-60SR can be used with this generic Y Belt 60.
SKU: PBEMI83003O
Manufacturer part number: M800920
Manufacturers: DIGIPRINT , Mimaki
R-BEARING D8S4(B3) – 11889102
$47.78The Roland GX-24 cutting plotters can use this R-Bearing D8S4(B3).
SKU: 11889102
Manufacturer part number: 11889102
Manufacturer: Roland
SP-300 Linear Encoder Board – 6700909040
$145.44This generic linear encoder board is suitable for Roland SP / FJ / SJ series printers.
SKU: PBOROSP6015
Manufacturer part number: 6700909040
Manufacturers: DIGIPRINT , Roland
RS-640 Carton, Sleeve – 1000004760
$345.54This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000004760
Manufacturer part number: 1000004760
Manufacturer: Roland
Marabu ClearShield Classic Lite – 5L, Gloss
$287.41Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360298811
Manufacturer part number: 360298811
Related Products
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
Reviews
There are no reviews yet.