Description
This 2,56m long LM Guide (2 blocks) is suitable for Mimaki JV5-130S printers. This is the original Mimaki part (number SSR15XW2GC1F+2560LYF ).
Additional information
| Ink Type | Aqueous, Direct to Garment, DTF, Dye, Dye Sublimation, Eco-Solvent, Edible, Hard Solvent, Latex, Low Solvent, Mild Solvent, Pigment, UV, UV Curable |
|---|---|
| Printer Brand | Agfa, Brother, Canon, Epson, Fuji, Homer, HP, Kiaro, Kornit, Kyosera, Mimaki, Mutoh, Noritsu, NUR, Oce, Oki, Ricoh, Roland, Seiko, STS, Vutek |
| Printer Model | Jeti Titan 3020, Jeti Titan HS, Jeti Titan S |
| Printer Series | Jeti Mira Series, Jeti Tauro Series, Jeti Titen Series |
VJ-1614 Flushing Waste Fluid Receiver – DE-36933
$24.46This Flushing Waste Fluid Receiver is suitable for Mutoh VJ-1614 printers. This is the original Mutoh part (number DE-36933).
SKU: DE-36933
Manufacturer part number: DE-36933
Manufacturer: Mutoh
Marabu ClearShield® Anti-Graffiti Part A, Gloss – 1 Quart
$142.91Marabu Clearshield® Anti-Graffiti is a two-part, water-based liquid clear coat that protects any print from UV rays, resists chemicals and abrasion, and has unparalleled anti-graffiti properties. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360264581
Manufacturer part number: 360264581
Manufacturer: Marabu
JF-1631 Coupling – MCO17-5-5
$241.11JF-1631 printers can use this coupling. This is the original Mimaki part (number MCO17-5-5).
SKU: MCO17-5-5
Manufacturer part number: MCO17-5-5
Manufacturer: Mimaki
RJ-901C CR Belt A1 Assy – DF-49044
$189.46Mutoh RJ-901C (Drafstation Pro) printers are compatible with this CR Belt A1 assembly.
SKU: DF-49044
Manufacturer part number: DF-49044
Manufacturer: Mutoh
Mimaki JV5 Capping Assy (2pcs)
$97.40Mimaki JV5 printers can use this set of two generic capping assys.
SKU: PCAMIJV5003
Manufacturer part number: M905240
Manufacturers: DIGIPRINT , Mimaki
DC3 BEARING D=.5/.25 – MB0385
$24.39This BEARING D=.5/.25 is suitable for Summa DC3 printers. This is the original Summa part (partnumber MB0385).
SKU: MB0385
Manufacturer part number: MB0385
Manufacturer: Summa
Related Products
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
Reviews
There are no reviews yet.