Description
Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt. On the JV3 printer, it is a short belt that runs between the Y motor and the Y pulley. This belt has a width of 1.5 cm and a circumference of 38 cm.
JV34-260 Damper Joint Assy – M010793
$25.60This damper joint assy is suitable for Mimaki JV34-260 printers.
SKU: M010793
Manufacturer part number: M010793
Manufacturer: Mimaki
EPSON R1390/ L1800 Ink Capping Station
$196.13This Ink Capping Station is compatible with a wide range of DTF printers based on Epson Stylus Photo 1390 / 1400 / 1410 printhead.
SKU: PCAEP3901
Manufacturer: Epson
Y Tube Fitting ID Tubing 3.2MM Nylon Black (20 pcs)
$73.65This set of 20 solvent resistant black nylon Y tube fitting is suitable for all wide format inkjet printers printers.
SKU: Y230-2/20
Manufacturer: DIGIPRINT
FP-740 Carton, Gauge TU-750 – 22605113
$13.84This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 22605113
Manufacturer part number: 22605113
Manufacturer: Roland
VP-300 Carton, Sleeve Type2 – 1000005505
$295.52Roland VP-300 printers are compatible with this Carton, Sleeve Type2 model. This is the original Roland part (number 1000005505).
SKU: 1000005505
Manufacturer part number: 1000005505
Manufacturer: Roland
VJ-1938 Steel Belt 74 Assy – DG-45268
$187.44Mutoh printers can use this VJ-1938 Steel Belt 74 Assy – DG-45268. This is the original Mutoh component (number DG-45268).
SKU: DG-45268
Manufacturer part number: DG-45268
Manufacturer: Mutoh
Related Products
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
S Class 75 KIT FLATCABLES S75T – 395-403
$240.67This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
VJ-1604 Steel Belt – DF-43937
$206.65Mutoh Valuejet 1604 printers are compatible with this steel belt.
SKU: DF-43937
Manufacturer part number: DF-43937
Manufacturer: Mutoh
CR Deceleration Belt(210)Assy – DG-42458
$148.99Mutoh printers are compatible with this CR Deceleration Belt Assembly.
SKU: DG-42458
Manufacturer part number: DG-42458
Manufacturer: Mutoh
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
Reviews
There are no reviews yet.