VUTEk QS- and GS-Series printers are compatible with this set of 20 Fitting Luer Male.170. These connectors have a male ISO Luer lock on one side and an 4.3mm (0.17 inch) tube hose barb on the other side. P4812-A is the original VUTEk component.
This set of 20 solvent resistant white polypropylene Y tube fitting is suitable for all wide format inkjet printers printers.
SKU: Y410-6005/20
Manufacturer: DIGIPRINT
This Belt PF2 is suitable for Summa DuraChrome printers. This is the original Summa part (number 446066-01VH).
SKU: 446066-01VH
Manufacturer part number: 446066-01VH
Manufacturer: Summa
This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000004759
Manufacturer part number: 1000004759
Manufacturer: Roland
This genuine Roland component, the BEARING, TIMING PULLEY 6200ZZCM, is compatible with a specific line of Roland printers.
SKU: 1000021916
Manufacturer part number: 1000021916
Manufacturer: Roland
This Carriage Belt VC-600 is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: ME-G20600054G
Manufacturer part number: ME-G20600054G
Manufacturer: Mutoh
For Roland BN-20 printers, this Adapter, Joint 2-3L Mcl1522 is suitable.
SKU: 1000007743
Manufacturer part number: 1000007743
Manufacturer: Roland
Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Select at least 2 products
to compare
Reviews
There are no reviews yet.