Description
For VUTEk GS-Series printers, this set of 10 Fitting Luer -> 3/32 Female is suitable. These connectors have a female ISO Luer lock on one side and an 3/32 inch tube hose barb on the other side. This is the original VUTEk part (number P2122-A).
Mutoh / Roland Solvent Cap Top
$49.75This generic foam cap top of high quality fits the capping station of Roland Soljet and Versacamm printers as well as Mutoh Rockhopper II, Falcon II, and Spitfire.
SKU: PCAROSJ006
Manufacturers: DIGIPRINT , Roland , Mutoh
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
TX2-1600 Hose Joint – M601138
$43.95Mimaki TX2-1600 printers are compatible with this Hose Joint. The outer diameter of this Hose Joint is 34.1mm, while the inner diameter is 19.05mm. This is original Mimaki part (number M601138).
SKU: M601138
Manufacturer part number: M601138
Manufacturer: Mimaki
VJ-1204 CR Belt A0 Assy – DF-49045
$223.31This CR Belt A0 assy is suitable for Mutoh Valuejet 1204 printers.
SKU: DF-49045
Manufacturer part number: DF-49045
Manufacturer: Mutoh
PV200/600 Bearing Kit, Set of (4) Matched AA90341 – 45081046
$4,598.63This set of 4 bearings is suitable for EFI VUTEk PressVU 200/600 printers. This is the original EFI VUTEk part (number 45081046).
SKU: 45081046
Manufacturer part number: 45081046
Manufacturer: EFI
Anapurna M2050 Conveyor Belt Wire 3.5m – D2+7910001-0077
$1,250.70Agfa printers are compatible with this Anapurna M2050 Conveyor Belt Wire 3.5m – D2+7910001-0077.
SKU: D2+7910001-0077
Manufacturer part number: D2+7910001-0077
Manufacturer: Agfa
Related Products
Summa S Class Kit S(2) 120 Flat Cable – KIT-2030
$416.04This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
VJ-1604 Steel Belt – DF-43937
$206.65Mutoh Valuejet 1604 printers are compatible with this steel belt.
SKU: DF-43937
Manufacturer part number: DF-43937
Manufacturer: Mutoh
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
Reviews
There are no reviews yet.