Description
This timing belt is suitable for EFI VUTEk GS series printers. The original EFI component is this one (number 45075896). This timing belt has a width of 30 mm and a length of 10,92 m.
Solvent resistant head adapter for FJ-500 printhead
$1,645.44Solvent resistant manifold suitable for Epson DX3 printheads. You can convert a water-based FJ-500/FJ-600 printhead into a solvent-resistant component by replacing this manifold.
SKU: PADEPDX301
Manufacturer part number: 84439910
Manufacturers: DIGIPRINT , Roland
Jeti Female Luer to Hose Barb Connector 3mm ID Tubing (20 pcs)
$84.18The Jeti ink tank uses this set of 20 Female Luer to Hose Barb connectors, which are compatible with 3mm ID tubing.
SKU: FTLL230-6005/20
Manufacturers: Agfa , DIGIPRINT
Fitting f2 – M603013
$2.40Mimaki JV150 and JV300 printers can use this Fitting Assy.
SKU: M603013
Manufacturer part number: M603013
Manufacturer: Mimaki
RS-540 Adapter, Joint 2-3FAI – 1000004796
$17.58The Roland RS-540 printers are compatible with this Adapter, Joint 2-3FAI.
SKU: 1000004796
Manufacturer part number: 1000004796
Manufacturer: Roland
VS-420 L-BEARING,SSR15XW1GGE/W2GE+1750L – 1000007140
$3,714.37This L-BEARING,SSR15XW1GGE/W2GE+1750L is suitable for Roland VS-420 printers. This is the original Roland part (number 1000007140).
SKU: 1000007140
Manufacturer part number: 1000007140
Manufacturer: Roland
Related Products
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
AJ-1000 Assy, Pinch Org Board – W700105720
$69.44This Assy, Pinch Org Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number W700105720).
Printer compatibility
Roland AJ-1000
Roland AJ-1000i
Roland AJ-740
Roland AJ-740i
Product specifications
XJ-640 Belt,150S2M2754LW-C – 1000003688
$644.02Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
Reviews
There are no reviews yet.