Description
This LM Guide 1720LY is suitable for Roland FJ-400 printers. The rail without blocks that goes with part number 21895151 is included in this item. This LM guide is 1720mm long.
Jeti Jason Toothed Timing Belt – 615-424800
$121.79This original Jason toothed timing belt is suitable for Agfa Gandinnovations Jeti 5000 and 5024 Solvent printers. The belt has a circumference of 424 millimeters and a width of 20 millimeters and can withstand temperatures of -20 to 100 degrees Celsius. This is the original Agfa / Gandinnovations part (number 615-424800).
SKU: HTD 424-8M
Manufacturer part number: 615-424800
Manufacturer: Agfa
Y Tube Fitting ID Tubing 6.4MM Nylon Black (20 pcs)
$76.45This set of 20 solvent resistant black nylon Y tube fittings is suitable for all wide format inkjet printers printers.
SKU: Y260-2/20
Manufacturer: DIGIPRINT
DC3 BEARING DDRIF-814ZZR – MB0318
$31.36This BEARING DDRIF-814ZZR is suitable for Summa DC3 printers. This is the original Summa part (partnumber MB0318).
SKU: MB0318
Manufacturer part number: MB0318
Manufacturer: Summa
Marabu ClearShield Classic – 20L, Gloss
$1,045.79Marabu Clearshield® Classic is a high-viscosity water-based liquid coating for enhanced UV-protection, chemical and abrasion resistance. For use on most non-water sensitive materials. can be applied by hand using a brush or roller. Of all the formulations, ClearShield Classic has the highest film build. It works well for banners, vinyl, and vertical applications.
SKU: 360299911
Manufacturer part number: 360299911
Manufacturer: Marabu
CJV300-160 Y Drive Belt 160 – M801828
$278.75This Y Drive Belt 160 is suitable for CJV300-160, CJV150-160, JV150-160 and JV300-160 printers.
SKU: M801828
Manufacturer part number: M801828
Manufacturer: Mimaki
UJF-3042 Cap Assy – M012112
$100.87Mimaki UJF-3042 printers can use this generic Cap Assy.
SKU: PCAMI14085O
Manufacturer part number: M012112
Manufacturers: DIGIPRINT , Mimaki
Related Products
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
VJ-1604 Steel Belt – DF-43937
$206.65Mutoh Valuejet 1604 printers are compatible with this steel belt.
SKU: DF-43937
Manufacturer part number: DF-43937
Manufacturer: Mutoh
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
Summa S Class Kit S(2) 120 Flat Cable – KIT-2030
$416.04This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
Reviews
There are no reviews yet.