Description
A wide range of Epson XP600/TX800 printhead-based DTF printers can use this generic capping unit. The capping inlets fit ink tubes of an inner diameter of 2mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. We recommend changing the capping units when replacing the printhead. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
VP-540 Belt,150S2M2153LW-C – 1000002547
$45.66Roland VP-540 printers can use this generic belt.
SKU: PBEROVP6002O
Manufacturer part number: 1000002547
Manufacturers: DIGIPRINT , Roland
FP-740 Carton, Vk-Spacer – 1000001174
$25.11This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000001174
Manufacturer part number: 1000001174
Manufacturer: Roland
Marabu ClearShield® Anti-Graffiti Part A, Gloss – 1 Quart
$142.91Marabu Clearshield® Anti-Graffiti is a two-part, water-based liquid clear coat that protects any print from UV rays, resists chemicals and abrasion, and has unparalleled anti-graffiti properties. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360264581
Manufacturer part number: 360264581
Manufacturer: Marabu
JF Series Timing Belt – 200S3M339UG
$47.91Mimaki printers JF-1610 and JF-1631 can use this belt.
SKU: 10579
Manufacturer part number: 200S3M339UG
Manufacturer: Mimaki
ValueCut X-Axis Belt – ML-10022
$184.15This X-Axis Belt is suitable for Mutoh ValueCut series cutting plotters. This is the original Mutoh part (number ML-10022). This X-Axis Belt has a 10mm width and a circumference length of 220mm.
SKU: ML-10022
Manufacturer part number: ML-10022
Manufacturer: Mutoh
VJ-426UF I/C Holder Assy 1 (Fitting) – DG-45274
$775.08This I/C Holder Assy 1 (Fitting) is suitable for Mutoh Valuejet 426UF printers. This is the original Mutoh part (number DG-45274).
SKU: DG-45274
Manufacturer part number: DG-45274
Manufacturer: Mutoh
Related Products
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
AJ-1000 Assy, Main Board – 1000000559
$3,431.37This Assy, Main Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 1000000559). Printer compatibility Roland AJ-1000 Roland AJ-1000i Roland AJ-740 Roland AJ-740i Product specifications Type Main Boards
AJ-1000 Assy, Pinch Org Board – W700105720
$69.44This Assy, Pinch Org Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number W700105720).
Printer compatibility
Roland AJ-1000
Roland AJ-1000i
Roland AJ-740
Roland AJ-740i
Product specifications
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
Reviews
There are no reviews yet.