Description
A wide range of Epson XP600/TX800 printhead-based DTF printers can use this generic capping unit. The capping inlets fit ink tubes of an inner diameter of 2mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. We recommend changing the capping units when replacing the printhead. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
SummaSign ASSY, BELT, 63 – 391-078
$730.80This ASSY, BELT, 63 is suitable for Summa SummaSign cutters. This is the original Summa part (number 391-078).
SKU: 391-078
Manufacturer part number: 391-078
Manufacturer: Summa
Marabu Clearshield® Classic Lite – 5L – Semi-Gloss
$306.08Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360298812
Manufacturer part number: 360298812
Manufacturer: Marabu
FP-740 Bearing Housing A 211-106 – 22115106
$53.20This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 22115106
Manufacturer part number: 22115106
Manufacturer: Roland
CJ-540 Case, PE Bottle 5-038-03 – 11369122
$89.60Roland CJ-540 printers are compatible with this PE bottle.
SKU: 11369122
Manufacturer part number: 11369122
Manufacturer: Roland
DIGIMEDIA Monomeric Gloss Overlaminate – 1050 mm x 50 m (42″ x 164′)
$164.50High-quality, self-adhesive monomeric 70μ clear vinyl, with UV protection and a permanent, high tack acrylic-based, adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. Price per sqm: as low as €1.30 / sqm
SKU: DLMG42
Manufacturer part number: DLMG42
Manufacturer: DIGIPRINT
Jetrix L-shaped One Touch Fitting
$23.21This L-shaped One Touch Fitting is appropriate for the printers Inktec Jetrix 3015FQ and 2513FRQ.
SKU: KQ2L08-02AS
Manufacturer: Inktec
Related Products
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
VJ-1604 Bearing – KY-14620
$4.57Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
VJ-1604 Steel Belt – DF-43937
$206.65Mutoh Valuejet 1604 printers are compatible with this steel belt.
SKU: DF-43937
Manufacturer part number: DF-43937
Manufacturer: Mutoh
Reviews
There are no reviews yet.