Description
The Epson L1800 printhead-based DTF printers that this generic capping unit set, which includes two capping units, is compatible with are numerous. The capping inlets fit ink tubes of an inner diameter of 2mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. We recommend changing the capping units when replacing the printhead. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
Marabu ClearShield Classic Lite – 1L, Gloss
$76.53Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360297811
Manufacturer part number: 360297811
Manufacturer: Marabu
VUTEK GS 3250LX PRO – Carriage Pulley Bearing
$256.62This bearing is suitable for VUTEK GS 3250LX PRO printers.
SKU: PMEVUGS3250
Manufacturer: EFI
Generic Open White PU Belt S2M 15mm (7.8m roll)
$115.63S2M 15mm generic open white PU belt (7.8m roll)
SKU: GALS2M8O
LEJ-640 Belt, 146P2M4-530 – 1000005794
$54.14This generic belt is suitable for Roland LEJ-640 printers.
SKU: 009394
Manufacturer part number: 1000005794
Manufacturers: Roland , DIGIPRINT
LEF-20 Carton, Support – 1000011794
$79.86This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000011794
Manufacturer part number: 1000011794
Manufacturer: Roland
Osprey 75 Steel Belt Assy – DF-47847
$266.00Mutoh Osprey 75 printers can use this generic Steel Belt (19) Assy. This is a high quality steel belt that corresponds to Mutoh part number DF-47847. This Steel Belt is 5.54m long and 250mm wide.
SKU: PMEMUOS6015O
Manufacturer part number: DF-47847
Manufacturers: DIGIPRINT , Mutoh
Related Products
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
SummaSign BELT Y-MOTOR 150T – MB0380
$20.91Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
Reviews
There are no reviews yet.