Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit.
The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added.
When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer.
The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
RS-640 Carton, Stand – 1000004761
$202.38This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000004761
Manufacturer part number: 1000004761
Manufacturer: Roland
FJ-540 Case Cap Top – 21365121
$12.59Roland printers are suitable for this cap-top case.
SKU: 21365121
Manufacturer part number: 21365121
Manufacturer: Roland
Roland ADAPTER,I/C BU-1 – 1000003807
$13.91The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 1000003807
Manufacturer part number: 1000003807
Manufacturer: Roland
JV3 ID Point Of Contact PCB CN032 – E105363
$29.88This ID Point Of Contact PCB CN032 is suitable for Mimaki JV3 / JV33 / JV5 and CJV30 series printers.
RE-640 Assy, Cap Top – 6000007135
$236.54Roland RE-640 printers are compatible with this cap top.
SKU: 6000007135
Manufacturer part number: 6000007135
Manufacturer: Roland
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
Related Products
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
S Class 75 KIT FLATCABLES S75T – 395-403
$240.67This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
Reviews
There are no reviews yet.