Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit.
The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added.
When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer.
The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
Marabu ClearShield Select, Satin – 1L
$94.38Marabu ClearShield Select, Satin – 1L
SKU: 360297213
Manufacturer part number: 360297213
Manufacturer: Marabu
Straight Through Tube Fitting ID Tubing 4mm Nylon Black (20 pcs)
$87.67This set of 20 solvent resistant black nylon straight through tube fitting is suitable for all wide format inkjet printers printers.
SKU: N440-2/20
Manufacturer: DIGIPRINT
Epson Stylus Pro 7800 Solvent Capping
$45.23Ecosolvent-based Epson Stylus Pro 7800 and 9400 printers can use this high-quality cap. This cap is guaranteed to last a long time because it is printed with solvent inks.
SKU: PCAEP7802
Manufacturers: DIGIPRINT , Epson
BELT,100S2M1539LW-C – 1000002671
$536.37This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000002671
Manufacturer part number: 1000002671
Manufacturer: Roland
This solvent resistant connector helps connects two tubes (ID: 3mm, OD: 4mm) together.
$15.08This solvent resistant connector helps connects two tubes (ID: 3mm, OD: 4mm) together.
SKU: PCNDI8745
Manufacturers: DIGIPRINT , Mutoh , Roland , Mimaki
GS Series Fitting Luer Male .170 Barb (10 pcs) – P4812-A
$77.35This set of 10 Fitting Luer Male .170 is suitable for VUTEk QS-series and GS-Series printers.
SKU: PCNVU12635
Manufacturer part number: P4812-A
Manufacturer: EFI
Related Products
SJ-740 L-Bearing SSR15XW1UUE – 21895153 (Block only)
$306.56For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
VJ-1604 Bearing – KY-14620
$4.57Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
AJ-1000 Assy, Main Board – 1000000559
$3,431.37This Assy, Main Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 1000000559). Printer compatibility Roland AJ-1000 Roland AJ-1000i Roland AJ-740 Roland AJ-740i Product specifications Type Main Boards
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Reviews
There are no reviews yet.