Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit.
The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added.
When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer.
The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
QS Series Fitting Luer 1/8 Male ( 20 pcs) – P1922-A
$72.98The VUTEk UltraVU 150, VUTEk PressVU 200/600, and VUTEk QS-series printers can all use this set of 20 Fitting Luer 1/8 Males.
SKU: MTLL013-1/20
Manufacturer part number: P1922-A
Manufacturers: EFI , DIGIPRINT
Straight Hose Tail Coupling 1/8″ – PMCD2202
$76.45This Straight Hose Tail Coupling 1/8″ is suitable for a specific range of printers using Starfire printheads.
SKU: PMCD2202
Manufacturer part number: PMCD2202
Manufacturer: DIGIPRINT
LEJ-640 Adjuster, M12*60*103 – 1000009360
$61.17This Adjuster, M12*60*103 is suitable for Roland LEJ-640 printers. This is the original Roland part (number 1000009360).
SKU: 1000009360
Manufacturer part number: 1000009360
Manufacturer: Roland
PULLEY BEARING – 12569118
$9.27Roland AJ-1000 printers are compatible with this PULLEY BEARING.
SKU: 12569118
Manufacturer part number: 12569118
Manufacturer: Roland
LPX-1200 LM Guide 400L (Rail Only)
$443.25This LM Guide 400L is suitable for Roland LPX-1200 laser scanners. The rail alone, without the blocks, is included in this component, which is the same as part number 21895167. This LM Guide is 400mm long.
SKU: 414SR15-2050L
Manufacturer part number: 21895167
Manufacturer: Roland
DC3 ASSY Y-BELT – 420-398
$460.12Summa DC3 printers are compatible with this ASSY Y-BELT. This is the first part of the Summa (numbered 420-398).
SKU: 420-398
Manufacturer part number: 420-398
Manufacturer: Summa
Related Products
S Class 75 KIT FLATCABLES S75T – 395-403
$240.67This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
SummaSign BELT Y-MOTOR 150T – MB0380
$20.91Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
Reviews
There are no reviews yet.