Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit.
The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added.
When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer.
The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
GS Series Fitting Luer 3/32 Female (10 pcs) – P2122-A
$42.09For VUTEk GS-Series printers, this set of 10 Fitting Luer -> 3/32 Female is suitable. These connectors have a female ISO Luer lock on one side and an 3/32 inch tube hose barb on the other side. This is the original VUTEk part (number P2122-A).
SKU: PCNVU12631
Manufacturer part number: P2122-A
Manufacturer: EFI
Roland L-BEARING,BALL BUSH SM-16GWUU – 1000011862
$228.64The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000011862
Manufacturer part number: 1000011862
Manufacturer: Roland
SWJ-320 Y-drive belt (Long) – HDK1E-0001
$442.67Mimaki SWJ printers are compatible with this Long Y-drive belt.
SKU: HDK1E-0001
Manufacturer part number: HDK1E-0001
Manufacturer: Mimaki
VG-640 Assy, Cap Top – 6000002332
$198.33For Roland printers, this VG-640 Assy, Cap Top – 6000002332 is suitable.
SKU: PCARO81948O
Manufacturer part number: 6000002332
Manufacturers: DIGIPRINT , Roland
Marabu ClearShield® Anti-Graffiti Part A, Gloss – 1 Gallon
$307.57Marabu Clearshield® Anti-Graffiti is a two-part, water-based liquid clear coat that protects any print from UV rays, resists chemicals and abrasion, and has unparalleled anti-graffiti properties. It is made to protect non-water-sensitive media like vinyl and banners printed with UV, solvent, and Latex inks from graffiti made with spray paint, latex paint, markers, and other materials.
SKU: 360259581
Manufacturer part number: 360259581
Manufacturer: Marabu
Marabu ClearShield Classic Lite – 1L, Gloss
$76.53Marabu Clearshield® Classic is a water-based liquid coating with a low viscosity that provides enhanced UV protection as well as chemical and abrasion resistance. can be applied with a brush, roller, or automated spray equipment or by hand. If you’re looking for a laminate with a lower viscosity, Classic Lite is an option that provides the same excellent protection as ClearShield Classic.
SKU: 360297811
Manufacturer part number: 360297811
Manufacturer: Marabu
Related Products
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
JV5 Bearing – F699ZZ
$4.93Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
Reviews
There are no reviews yet.