Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit.
The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added.
When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer.
The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
SC-550 X-Drive Belt – DE-44157
$62.48Cutting plotters such as the Mutoh Kona, SC, and Ultima can all use this X-drive Belt.
SKU: 013718
Manufacturer part number: DE-44157
Manufacturer: Mutoh
VJ-1614 Connector Valve Head (8pcs) – DG-41556
$210.96Mutoh Valuejet 1614 printers are compatible with this set of eight Connectors valve head (VJ-1614).
SKU: DG-41556
Manufacturer part number: DG-41556
Manufacturer: Mutoh
Mimaki / Roland / Mutoh Solvent Resistant Y Connector (ID: 3mm, OD: 4mm)
$15.08Three tubes with an ID of 3 mm and an OD of 4 mm can be connected with this solvent-resistant Y connector.
SKU: PCNDI8749
Manufacturers: DIGIPRINT , Mutoh , Roland , Mimaki
AJ-1000 ASSY,CAP HEAD – 1000000770
$26.66This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 1000000770
Manufacturer part number: 1000000770
Manufacturer: Roland
RJ-900C 3-Way Joint New type – DG-42727
$123.07Mutoh RJ-900C printers are compatible with this three-way joint new type.
SKU: DG-42727
Manufacturer part number: DG-42727
Manufacturer: Mutoh
Y Tube Fitting ID Tubing 1.6MM Nylon Black (100 pcs)
$289.09This set of 100 black nylon Y tube fittings that resist solvents is compatible with all wide format inkjet printers.
SKU: Y210/2
Manufacturer: DIGIPRINT
Related Products
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
S Class 75 KIT FLATCABLES S75T – 395-403
$240.67This KIT FLATCABLES S75T is suitable for Summa S Class 75 cutters. This is the original Summa part (number 395-403).
Printer compatibility
Summa S-Class-75-T-Series
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
Reviews
There are no reviews yet.