Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit.
The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added.
When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer.
The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
FP-740 Belt, 150S2M2999LW-C – 1000000395
$974.40This belt is suitable for Roland FP-740 printers.
SKU: PBERO12351
Manufacturer part number: 1000000395
Manufacturer: Roland
LC BIS Cartridge NF with Chip Reader for 3mm Tubing – ME-089016
$496.43Mutoh Valuejet 1614 printers with bulk ink systems are compatible with this Cartridge NF with Chip Reader for 3mm Tubing.
SKU: ME-089016
Manufacturer part number: ME-089016
Manufacturer: Mutoh
RS-540 LM Guide 2050L (Rail Only)
$3,727.32This LM Guide 2050L is suitable for Roland RS-540 printers. The original Roland part in this case is 1000004745. This LM Guide is 2050mm long.
SKU: 414SSR15-2560L
Manufacturer part number: 1000004745
Manufacturer: Roland
JF Series Cap Base – M400287
$79.25This JF Series Cap Base – M400287 is suitable for Mimaki printers.
SKU: M400287
Manufacturer part number: M400287
Manufacturer: Mimaki
Straight Through Reduction Tube Fitting 4 mm to 2.4 mm ID (20 pcs)
$83.40This set of 20 solvent resistant black nylon straight through reduction fitting is suitable for all wide format inkjet printers printers.
SKU: 2040-2/20
Manufacturer: DIGIPRINT
L Type Fitting VJ Waste – DG-41175
$38.68A particular Mutoh printer line is compatible with this original Mutoh part, an L Type Fitting VJ Waste.
SKU: DG-41175
Manufacturer part number: DG-41175
Manufacturer: Mutoh
Related Products
Summa S Class Kit S(2) 120 Flat Cable – KIT-2030
$416.04This KIT FLATCABLES S120T is suitable for Summa S Class 12 cutters. This is the original Summa part (replacing part number 395-405).
Printer compatibility
Summa S-Class-120-T-Series
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
JV5 Bearing – F699ZZ
$4.93Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
Reviews
There are no reviews yet.