Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit.
The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added.
When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer.
The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
VJ-1614 Flushing Waste Fluid Receiver – DE-36933
$24.46This Flushing Waste Fluid Receiver is suitable for Mutoh VJ-1614 printers. This is the original Mutoh part (number DE-36933).
SKU: DE-36933
Manufacturer part number: DE-36933
Manufacturer: Mutoh
Osprey 75 Steel Belt Assy – DF-47847
$266.00Mutoh Osprey 75 printers can use this generic Steel Belt (19) Assy. This is a high quality steel belt that corresponds to Mutoh part number DF-47847. This Steel Belt is 5.54m long and 250mm wide.
SKU: PMEMUOS6015O
Manufacturer part number: DF-47847
Manufacturers: DIGIPRINT , Mutoh
XR-640 Carton, Vkit – 1000009825
$23.39This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000009825
Manufacturer part number: 1000009825
Manufacturer: Roland
VJ-2638 Steel Belt_Assy – DG-43699
$307.58Mutoh Valuejet 2638 printers are compatible with this Steel Belt Assembly.
SKU: DG-43699
Manufacturer part number: DG-43699
Manufacturer: Mutoh
VS-640i Carton, Spacer – 1000011035
$83.28This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000011035
Manufacturer part number: 1000011035
Manufacturer: Roland
Jeti 3312 UNF Thread to Hose Barb connector 3mm ID Tubing (10 pcs)
$51.21This set of ten UNF Thread to Hose Barb connectors is used on the Jeti 3312 ink tank and is compatible with 3mm ID tubing. The original Agfa part is here. The inner diameter of this UNF Thread to Hose Barb connector is 2.41 millimeters, while the outer diameter is 3.30 millimeters.
SKU: PCNAG13439
Manufacturer: Agfa
Related Products
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
XJ-640 Belt,150S2M2754LW-C – 1000003688
$644.02Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
Reviews
There are no reviews yet.