Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit. The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
VS-300i Adapter, Joint 2L Mcl-1 – 1000008314
$23.21Roland VS-300i printers are compatible with this Adapter, Joint 2L Mcl-1.
SKU: 1000008314
Manufacturer part number: 1000008314
Manufacturer: Roland
RE-640 Assy, Cap Top – 6000007135
$236.54Roland RE-640 printers are compatible with this cap top.
SKU: 6000007135
Manufacturer part number: 6000007135
Manufacturer: Roland
UJV-160 Y Drive Belt V160-6500 – M801070
$673.93This UJV-160 Y Drive Belt V160-6500 – M801070 is suitable for Mimaki printers.
SKU: M801070
Manufacturer part number: M801070
Manufacturer: Mimaki
JV33 Cap Pads (10 pcs) – SPA-0161
$41.73Mimaki JV33 printers can use this box of ten generic cap pads.
SKU: PCAMIJV3302O2
Manufacturer part number: SPA-0161
Manufacturers: DIGIPRINT , Mimaki
Ricoh IP5000 Damper, Head Ink (2 pcs) – VV12X1972
$16.82Ricoh IP5000 printers are compatible with this two-pack of generic Damper, Head Ink.
SKU: PDARI1972
Manufacturer part number: VV12X1972
Manufacturers: Ricoh , DIGIPRINT
CONNECTOR,SUPPLAY SECTION LF4131 – 1000021808
$39.69This original Roland component, the CONNECTOR, SUPPLAY SECTION LF4131, is suitable for a specific line of Roland printers.
SKU: 1000021808
Manufacturer part number: 1000021808
Manufacturer: Roland
Related Products
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
SummaSign BELT Y-MOTOR 150T – MB0380
$20.91Summa SummaSign cutters are compatible with this BELT Y-MOTOR 150T.
SKU: 004612
Manufacturer part number: MB0380
Manufacturer: Summa
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
AJ-1000 Assy, Main Board – 1000000559
$3,431.37This Assy, Main Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number 1000000559). Printer compatibility Roland AJ-1000 Roland AJ-1000i Roland AJ-740 Roland AJ-740i Product specifications Type Main Boards
JV5 Bearing – F699ZZ
$4.93Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Reviews
There are no reviews yet.