Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit. The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
BELT,MAIN SCANNING – 1000021963
$2,718.60The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000021963
Manufacturer part number: 1000021963
Manufacturer: Roland
Summa T1300 Belt – MB9125
$13.46The Summa T1300 cutting plotters can use this belt.
SKU: 9056
Manufacturer part number: MB9125
Manufacturer: Summa
VJ-1938 Steel Belt 74 Assy – DG-45268
$174.94Mutoh printers can use his VJ-1938 Steel Belt 74 Assy – DG-45268.
SKU: PBEMU83116O
Manufacturer part number: DG-45268
Manufacturers: DIGIPRINT , Mutoh
BELT,150S2M2153LW-C – 1000002547
$1,065.39This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 1000002547
Manufacturer part number: 1000002547
Manufacturer: Roland
TS300P-1800 Cap Assy – M015950
$161.12Mimaki printers can use this TS300P-1800 Cap Assy.
SKU: M015950
Manufacturer part number: M015950
Manufacturer: Mimaki
QS Series Fitting Luer 1/8 Male (10 pcs) – P1922-A
$77.35The VUTEk UltraVU 150, PressVU 200/600, and QS-series printers can all use this set of 10 Fitting Luer 1/8 Males. On one side, these connectors have a 1/8-inch tube hose barb and a male ISO Luer lock on the other. P1922-A is the original VUTEk component.
SKU: PCNVU12611
Manufacturer part number: P1922-A
Manufacturer: EFI
Related Products
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
XJ-640 Belt,150S2M2754LW-C – 1000003688
$644.02Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
AJ-1000 Assy, Pinch Org Board – W700105720
$69.44This Assy, Pinch Org Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number W700105720).
Printer compatibility
Roland AJ-1000
Roland AJ-1000i
Roland AJ-740
Roland AJ-740i
Product specifications
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
Reviews
There are no reviews yet.