Description
A wide range of Epson I3200/I1600 printhead-based DTF printers can use this generic capping unit. The inlets for the capping fit ink tubes with an inner diameter of 2 mm. To connect to ink tubes with an inner diameter of 3 millimeters, the connector DC-2/20 must be added. When replacing the printhead, we recommend changing the capping units. One capping unit is required for each head. Please refer to the images to determine which capping will fit your printer. The list of related products at the bottom of this page includes additional cappings that are also suitable for DTF printers.
SP-300i LM Guide 1440L (Rail only)
$4,185.75This LM guide is suitable for Roland SP-300i printers. This part includes the rail only (without the blocks) that corresponds to part number 1000002196. 1440mm in length is this LM Guide.
SKU: 414SR15-2740LY
Manufacturer part number: 1000002196
Manufacturer: Roland
FP-740 Adapter, I/C – 1000000195
$21.80The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000000195
Manufacturer part number: 1000000195
Manufacturer: Roland
XJ-640 Carton, Sleeve – 1000003567
$522.39The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 1000003567
Manufacturer part number: 1000003567
Manufacturer: Roland
RJ-900C 3-Way Joint New type – DG-42727
$123.07Mutoh RJ-900C printers are compatible with this three-way joint new type.
SKU: DG-42727
Manufacturer part number: DG-42727
Manufacturer: Mutoh
Marabu ClearShield Classic – 20L, Gloss
$1,045.79Marabu Clearshield® Classic is a high-viscosity water-based liquid coating for enhanced UV-protection, chemical and abrasion resistance. For use on most non-water sensitive materials. can be applied by hand using a brush or roller. Of all the formulations, ClearShield Classic has the highest film build. It works well for banners, vinyl, and vertical applications.
SKU: 360299911
Manufacturer part number: 360299911
Manufacturer: Marabu
Osprey 75 Steel Belt Assy – DF-47847
$266.00Mutoh Osprey 75 printers can use this generic Steel Belt (19) Assy. This is a high quality steel belt that corresponds to Mutoh part number DF-47847. This Steel Belt is 5.54m long and 250mm wide.
SKU: PMEMUOS6015O
Manufacturer part number: DF-47847
Manufacturers: DIGIPRINT , Mutoh
Related Products
JV33 Y Drive Belt – M800982
$254.72This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: M800982
Manufacturer part number: M800982
Manufacturer: Mimaki
JV3 Y Timing Belt – 150 S2M 380G
$11.39Mimaki JV3, JV33, and JV5 series printers are compatible with this generic speed reduction belt.
SKU: PBEMIJV305O
Manufacturer part number: 150 S2M 380G
Manufacturer: DIGIPRINT
CJ-540 Belt, 408P2M4-530 – 11929138
$16.00Roland CJ-540 printers are compatible with this generic belt, 408P2M4-530.
SKU: 008055
Manufacturer part number: 11929138
Manufacturers: Roland , DIGIPRINT
AJ-1000 Assy, Pinch Org Board – W700105720
$69.44This Assy, Pinch Org Board is suitable for Roland AJ-1000 printers. This is the original Roland part (number W700105720).
Printer compatibility
Roland AJ-1000
Roland AJ-1000i
Roland AJ-740
Roland AJ-740i
Product specifications
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
XJ-640 Belt,150S2M2754LW-C – 1000003688
$644.02Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
Reviews
There are no reviews yet.