Description
Océ Arizona 6100 and Fujifilm Acuity F series printers work with this Fitting Push Tee. The original Océ component (number 3010105241) is here. The inner diameter of this fitting is 4mm (5/35″), while the outer diameter is 6.4mm (1/4″).
SLEEVE,TOK BEARING2 – 1000022963
$16.73This SLEEVE,TOK BEARING2 is an original Roland part, suitable for a specific range of Roland printers.
SKU: 1000022963
Manufacturer part number: 1000022963
Manufacturer: Roland
This solvent resistant connector helps connects two tubes (ID: 3mm, OD: 4mm) together.
$15.08This solvent resistant connector helps connects two tubes (ID: 3mm, OD: 4mm) together.
SKU: PCNDI8745
Manufacturers: DIGIPRINT , Mutoh , Roland , Mimaki
FP-740 Carton, Vk-Spacer – 1000001174
$25.11This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000001174
Manufacturer part number: 1000001174
Manufacturer: Roland
Tube Fitting (Female) – DG-48837
$210.96This Tube Fitting (Female) is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-48837
Manufacturer part number: DG-48837
Manufacturer: Mutoh
Jeti Jason Toothed Timing Belt – 615-424800
$121.79This original Jason toothed timing belt is suitable for Agfa Gandinnovations Jeti 5000 and 5024 Solvent printers. The belt has a circumference of 424 millimeters and a width of 20 millimeters and can withstand temperatures of -20 to 100 degrees Celsius. This is the original Agfa / Gandinnovations part (number 615-424800).
SKU: HTD 424-8M
Manufacturer part number: 615-424800
Manufacturer: Agfa
VS-640i Carton, Cover – 1000011025
$385.12This product has been discontinued by the manufacturer. Please scroll down for more information below.
SKU: 1000011025
Manufacturer part number: 1000011025
Manufacturer: Roland
Related Products
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
SJ-740 L-Bearing SSR15XW1UUE – 21895153 (Block only)
$306.56For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
XJ-640 Belt,150S2M2754LW-C – 1000003688
$644.02Roland XJ-640 printers can use this generic belt.
SKU: PBEROXJ6001O
Manufacturer part number: 1000003688
Manufacturers: DIGIPRINT , Roland
JV5 Bearing – F699ZZ
$4.93Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
Reviews
There are no reviews yet.