Description
Océ Arizona 550 GT / XT printers are compatible with this Belt-Drive Carriage. This is the original Océ part (number 3010108440). This Belt-Drive Carriage is 781.3cm long and 5.1cm wide.
DIGIMEDIA Monomeric Gloss Overlaminate – 1524 mm x 50 m (60″ x 164′)
$251.42High-quality, self-adhesive 70 clear monomeric vinyl with UV protection and an acrylic-based, high-tack, permanent adhesive. This competitive calendered vinyl, which comes in gloss and matte finishes, is an excellent lamination for protecting digitally printed images. Easy to clean, this film can also be used as anti-graffiti protection. As low as €1.05 per square meter.
SKU: DLMG60
Manufacturer part number: DLMG60
Manufacturer: DIGIPRINT
Roland BEARING – 22175798
$58.84The manufacturer has discontinued this product. Please scroll down for more information below.
SKU: 22175798
Manufacturer part number: 22175798
Manufacturer: Roland
JFX200-2513 Y-Drive Belt – M801920
$1,296.74Mimaki printers can use this JFX200-2513 Y-Drive Belt – M801920.
SKU: M801920
Manufacturer part number: M801920
Manufacturer: Mimaki
SP-540v L-Bearing LWES15Q (Blocks – 3 pcs)
$1,335.73Roland SP-540v printers are compatible with this LWES15Q block.
SKU: LWES15C3R220Q
Manufacturer part number: 21895169
Manufacturer: Roland
GS Series Fitting Luer 3/32 Female (10 pcs) – P2122-A
$42.09For VUTEk GS-Series printers, this set of 10 Fitting Luer -> 3/32 Female is suitable. These connectors have a female ISO Luer lock on one side and an 3/32 inch tube hose barb on the other side. This is the original VUTEk part (number P2122-A).
SKU: PCNVU12631
Manufacturer part number: P2122-A
Manufacturer: EFI
UJF-3042 Cap rubber R – M700652
$154.11Mimaki printers can use this UJF-3042 Cap rubber R – M700652.
SKU: M700652
Manufacturer part number: M700652
Manufacturer: Mimaki
Related Products
VJ-1604 Bearing – KY-14620
$4.57Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
VJ-1608HS CR Deceleration Belt Assy – DG-42458
$52.86Mutoh VJ-1608HS printers can use this generic CR Deceleration Belt Assy.
SKU: 011011
Manufacturer part number: DG-42458
Manufacturers: DIGIPRINT , Mutoh
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
QEH15SA L-Bearing (Block only)
$168.63Various Roland and Mimaki printers are compatible with this bearing block, QEH15SA.
SKU: QEH15SA
Manufacturer part number: QEH15SA
Manufacturers: Roland , Mimaki
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Reviews
There are no reviews yet.