Description
Océ Arizona 250 GT printers are compatible with this Steel Belt Carriage Drive. The original Océ part (number 3010103685) is here. The length and width of this Steel Belt Carriage Drive are 38 millimeters.
Tube Fitting (Female) – DG-48837
$210.96This Tube Fitting (Female) is an original Mutoh part, suitable for a specific range of Mutoh printers.
SKU: DG-48837
Manufacturer part number: DG-48837
Manufacturer: Mutoh
JF-1610 Linear Way – MES20C2R1480
$1,509.65This linear way is suitable for Mimaki JF-1610 printers. This is the original Mimaki part (number MES20C2R1480). Two blocks make up this 1480mm-long linear path.
SKU: MES20C2R1480
Manufacturer part number: MES20C2R1480
Manufacturer: Mimaki
TS300P-1800 Cap Assy – M015950
$161.12Mimaki printers can use this TS300P-1800 Cap Assy.
SKU: M015950
Manufacturer part number: M015950
Manufacturer: Mimaki
SP-300 Assy, Linear ENC Board Service 3-Roland – 6700909040
$297.81Manufacturer part number: 6700909040
Manufacturer: Roland
FJ-540 Case Cap Top – 21365121
$12.59Roland printers are suitable for this cap-top case.
SKU: 21365121
Manufacturer part number: 21365121
Manufacturer: Roland
TX400-1800D Joint 3-3 – M601067
$9.65This TX400-1800D Joint 3-3 – M601067 is suitable for Mimaki printers.
SKU: M601067
Manufacturer part number: M601067
Manufacturer: Mimaki
Related Products
VJ-1604 CR Speed Reduction Belt – DF-43940
$56.70Mutoh Valuejet 1604 printers are compatible with this CR speed reduction belt. The original Mutoh component (DF-43940) can be found here. The circumference of this 10-millimeter-wide CR speed reduction belt is 240 millimeters.
SKU: PBEMUVJ6002
Manufacturer part number: DF-43940
Manufacturer: Mutoh
VP-540 L-Bearing, SSR15XW1GGE (Block only)
$302.13Several Roland printers are compatible with this bearing block, SSR15XW1GGE (see compatibility list below).
SKU: SSR 15 X W SS G
Manufacturer part number: 1000002145
Manufacturer: Roland
QEH15CA L-Bearing (Block only)
$238.90Various Roland and Mimaki printers are compatible with this bearing block, QEH15CA.
SKU: QEH15CA
Manufacturer part number: QEH15CA
Manufacturers: Roland , Mimaki
JV5 Bearing – F699ZZ
$4.93Mimaki JV5, JV33, and UJF-3042 printers are compatible with this generic bearing.
SKU: PMEMI18835
Manufacturer part number: F699ZZ
Manufacturers: Mimaki , DIGIPRINT
CJV300 Timing Belt – 100S2M210
$28.83Printers in the CJV300, CJV150, JV150, and JV300 series can use this timing belt.
SKU: 10379
Manufacturer part number: 100S2M210
Manufacturer: Mimaki
REX-62 Connector 30P Cable – ECARC02-0005
$51.47This 30 pins connecting cable is suitable for DGI REX-62, VT and VTII series printers. This is the original DGI part (number ECARC02-0005 replacing number 1356067). It measures 1.83m long and connects from the main board to the connector board. Printer compatibility DGI REX-62 DGI VT-100D DGI VT-130D DGI VT-62 DGI VT-92 DGI VTII-62 DGI […]
Reviews
There are no reviews yet.