Description
This Belt Gantry GT is suitable for Océ Arizona 250 GT printers. This is the original Océ part (number 3010103684). This Belt Gantry GT is 385.6cm long and 3.8cm wide.
BN-20 Assy, Cap Top _01 – 6701689040
$280.04This product has been discontinued by the manufacturer. Please continue reading for additional details.
SKU: 6701689040
Manufacturer part number: 6701689040
Manufacturer: Roland
VG-640 ADAPTER,JOINT VPL306 – 1000007124
$59.85The manufacturer has discontinued this product. Please continue reading for additional details.
SKU: 1000007124
Manufacturer part number: 1000007124
Manufacturer: Roland
Jetrix Male Luer Integral Lock Ring to 1/4-28 UNF Thread (20 pcs) – 00-AN00-86
$184.15This set of 20 Male Luer Integral Lock Rings to fit the Inktec Jetrix 3015FQ and 2513FRQ printers has a 1/4-28 UNF thread.
SKU: SMTLL-1/20
Manufacturer part number: 00-AN00-86
Manufacturers: Inktec , DIGIPRINT
JV33 / CJV30 Capping Station – M007389
$272.27Mimaki JV33 printers are compatible with this complete capping station.
SKU: M007389
Manufacturer part number: M007389
Manufacturer: Mimaki
VJ-1604 Bearing – KY-14620
$4.57Mutoh Valuejet 1604 printers can use this generic bearing.
SKU: PMEMUVJ002O
Manufacturer part number: KY-14620
Manufacturers: DIGIPRINT , Mutoh
R-BEARING,D10S6(B3FL) – 11889107
$48.07This R-BEARING,D10S6(B3FL) is an original Roland part, suitable for a specific range of Roland printers.
SKU: 11889107
Manufacturer part number: 11889107
Manufacturer: Roland
Related Products
JV3 Y Timing Belt – 150 S2M 380G
$14.42Mimaki JV3, JV33, and JV5 series printers can use this generic speed reduction belt.
SKU: S2M-380-15MM
Manufacturer part number: 150 S2M 380G
Manufacturers: Mimaki , DIGIPRINT
SummaSign BELT X-MOTOR 110T,W=0.25 – MB9124
$28.83Summa SummaSign cutters are compatible with this BELT X-MOTOR 110T, W=0.25.
SKU: 007828
Manufacturer part number: MB9124
Manufacturer: Summa
Carriage Drive Timing Belt
$182.62Specific printers can use this carriage drive timing belt.
SKU: 88S3M312
Manufacturer: DIGIPRINT
SJ-740 L-Bearing SSR15XW1UUE – 21895153 (Block only)
$306.56For some Roland printers, this generic bearing block, SSR15XW1UUE, is suitable.
SKU: PMERO17713
Manufacturer part number: 21895154
Manufacturers: Roland , DIGIPRINT
VJ-1604 Steel Belt – DF-43937
$156.19Mutoh Valuejet 1604 printers are compatible with this generic, high-quality Steel Belt. This is the same generic part as the Mutoh part (DF-43937). This belt is 25 mm wide and 4750 mm long. Part number PBEMUVJ6001 is also available for the original Mutoh belt.
SKU: PBEMU13975
Manufacturer part number: DF-43937
Manufacturers: DIGIPRINT , Mutoh
JV33 Y Drive Belt – M800982
$163.41Mimaki JV33 printers are compatible with this generic Y drive belt, which is also known as a carriage belt.
SKU: PBEMIJV3301S
Manufacturer part number: M800982
Manufacturers: Mimaki , DIGIPRINT
Reviews
There are no reviews yet.